Time Set - Siemens SCALANCE S615 Configuration Manual

4.1.2.2

time set

Description
With this command, you set the system clock.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
time set hh:mm:ss <day (1-31)>
{january|february|march|april|may|june|july|august|september|october|november|decembe
r}
<year (2000 - 2035)>
The parameters have the following meaning:
Parameter
hh:mm:ss
day
-
year
Result
The system time is set.
Further notes
You display the settings for the system clock with the
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
Description
Time of day
Day of the month
Month
Year
4.1 System time setting
Range of values / note
Hour, minute, second each sepa-
rated by ":" no link
1 ... 31
january, february, march, april,
may, june, july, august, septem-
ber, october, november, decem-
ber
2000 ... 2035
command.
show time
System time
125