Srv Name Auth; Srv Name Port - Siemens SCALANCE S615 Configuration Manual

6.9.3.4

srv name auth

Description
With this command, you change the authentication method of the proxy server.
Requirement
● The proxy server name has been created.
● You are in the PROXYSERVER configuration mode.
The command prompt is as follows:
cli(config-proxysrv)#
Syntax
Call up the command with the following parameters:
srv name <string(128)> auth <none|basic|ntlm>
The parameters have the following meaning:
Parameter
string
none
basic
ntlm
Result
The authentication method has been changed.
Further notes
You display the available proxy server names with the
You create the proxy server with the
6.9.3.5

srv name port

Description
With this command, you change the port of the proxy server.
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
Description
Proxy server name
No authentication
Standard authentication
The user name and password are sent
unencrypted.
Authentication according to the NTML
standard (Windows user logon)
command.
srv name
Network protocols
6.9 Proxy server
Range of values / note
Specify the proxy server
name.
Maximum of 128 characters
-
-
-
command.
srv show-names
261