Show Power-Line-State - Siemens SCALANCE S615 Configuration Manual

Diagnostics
10.1 Event and fault handling
Syntax
Call the command without parameters:
show logbook
or
Call up the command with the following parameters:
show logbook { info | warning | critical }
Parameter
The parameters have the following meaning:
Parameter
info
warning
critical
Result
The content of the logbook is displayed.
10.1.1.8

show power-line-state

Description
This command shows the status of the power supply.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show power-line-state
Result
The status of the power supply is displayed.
416
Description
Information
Warning
Critical
or
cli#
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02