No Ip Dhcp-Server Icmp-Probe - Siemens SCALANCE S615 Configuration Manual
Simatic net industrial ethernet security command line interface
Hide thumbs
Also See for SCALANCE S615:
- Getting started (44 pages) ,
- Manual (36 pages) ,
- Operating instructions manual (80 pages)
Table of Contents
Advertisement
Network protocols
6.4 DHCP server
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameter assignment:
no ip dhcp-server
Result
The DHCP server is disabled.
Further notes
You enable the DHCP server with the
6.4.2.3
no ip dhcp-server icmp-probe
Description
With this command, you disable the "Probe address with ICMP Echo before offer" function.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameter assignment:
no ip dhcp-server icmp-probe
Result
The function is disabled.
Further notes
You enable the function with the
194
command.
ip dhcp-server
ip dhcp-server icmp-probe
Configuration Manual, 06/2015, C79000-G8976-C406-02
command.
SCALANCE S615 Command Line Interface
Hide quick links:
Advertisement
Table of Contents
