Show Snmp User; Show Snmp Viewtree - Siemens SCALANCE S615 Configuration Manual

Network protocols
6.6 SNMP
6.6.1.12

show snmp user

Description
This command shows the settings for the SNMP user.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show snmp user
Result
The settings for the SNMP user are displayed.
6.6.1.13

show snmp viewtree

Description
This command shows the settings for the SNMP tree views.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show snmp viewtree
Result
The settings for the SNMP tree views are displayed.
228
or
cli#
or
cli#
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02