3.4
SRS
This section describes commands for the Siemens Remote Service (SRS).
To use the platform, additional service contracts are necessary and certain constraints must
be kept to. If you are interested in SRS, call your local Siemens contact or visit
http://support.automation.siemens.com/WW/view/en/42346681
(http://support.automation.siemens.com/WW/view/en/42346681).
3.4.1
show srs overview
Note
This command is only available with a KEY-PLUG.
Description
This command shows the configured destination server of the Siemens Remote Service
(SRS).
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameters:
show srs overview
Result
The configuration is displayed.
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
Functions specific to SCALANCE
3.4 SRS
97