Configuration
2.2 Load and Save
2.2.5.6
password
Description
With this command, you activate and configure the password for a file.
Requirement
You are in the LOADSAVE configuration mode.
The command prompt is as follows:
cli(config-loadsave)#
Syntax
Call up the command with the following parameters:
password {showfiles|filetype<filetype>[pw<password>]}
The parameters have the following meaning:
Parameter
showfiles
filetype
filetype
pw
password
Result
The password for the file is configured and activated.
Further notes
You disable the password with the
78
Description
Shows the available files
Shows that the file type follows that will be loaded
Name of the file type
Keyword for the password
Password
no password
Values
-
-
max. 100 characters
-
Enter the password for
the file.
command.
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02