Sender Mail-Address; No Sender Mail-Address - Siemens SCALANCE S615 Configuration Manual

Network protocols
6.10 SMTP client
Commands relating to other topics that can be called in the Global configuration mode can
be found in the relevant sections.
● If you exit the EVENTS configuration mode with the
Global configuration mode.
● If you exit the EVENTS configuration mode with the
Privileged EXEC mode.
6.10.2.1

sender mail-address

Description
With this command, you configure the e-mail name of the sender.
Requirement
You are in the EVENTS configuration mode.
The command prompt is as follows:
cli(config-events)#
Syntax
Call up the command with the following parameters:
sender mail-address <mail-address>
The parameter has the following meaning:
Parameter
mail-address
Result
The e-mail name of the sender is configured.
Further notes
You reset the e-mail name of the sender with the
You display the setting with the
6.10.2.2

no sender mail-address

Description
With this command, you reset the e-mail name of the sender.
268
Description
Email name of the sender
show events sender email
command, you return to the
exit
command, you return to the
end
Range of values / note
max. 100 characters
no sender mail-address
command.
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
.