Security and authentication
This part contains the sections that describe the access rights and authentication methods.
9.1
User rights management
This section describes commands for access as administrator and the configuration of the
authentication methods.
9.1.1
show users
Description
This command displays the users that logged on via Telnet or SSH.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameters:
show users
Result
The logged in users are displayed.
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
9
303