Coordinates Latitude; Coordinates Longitude - Siemens SCALANCE S615 Configuration Manual
Simatic net industrial ethernet security command line interface
Hide thumbs
Also See for SCALANCE S615:
- Getting started (44 pages) ,
- Manual (36 pages) ,
- Operating instructions manual (80 pages)
Table of Contents
Advertisement
Configuration
2.1 System
2.1.9.2
coordinates latitude
Description
With this command, you enter a latitude coordinate.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
coordinates latitude <latitude>
The parameter has the following meaning:
Parameter
latitude
Result
The latitude coordinate is created.
2.1.9.3
coordinates longitude
Description
With this command, you enter a longitude coordinate.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
coordinates longitude <longitude>
52
Description
Input box for the latitude coordinate
Range of values / note
max. 32 characters
To use spaces in the entry, enter
the latitude coordinate in quotes:
coordinates latitude "123
456"
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
Hide quick links:
Advertisement
Table of Contents
