Tftp Filename - Siemens SCALANCE S615 Configuration Manual

Configuration
2.2 Load and Save
The command prompt is as follows:
cli(config-loadsave)#
Syntax
Call up the command with the following parameters:
delete{showfiles|filetype<filetype>}
The parameters have the following meaning:
Parameter
showfiles
filetype
filetype
Result
The files are displayed or the file is deleted.
Further notes
With the "
2.2.5.2

tftp filename

Description
With this command, you assign a name to a file type.
The file type decides the type that is affected by the
name decides the file to be copied to or from the TFTP server.
Requirement
You are in the LOADSAVE configuration mode.
The command prompt is as follows:
cli(config-loadsave)#
Syntax
Call up the command with the following parameters:
tftp filename {showfiles|filetype< filetype >name<filename>}
74
Description
Shows the available files
Keyword for the file type to be deleted
Name of the file type
" command, you can display the file types.
show loadsave files
Range of values / note
-
-
max. 100 characters
or
tftp load tftp save
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
action. The