Network protocols
This part contains the sections that describe the commands for working with the various
network protocols.
6.1
IPv4 protocol
This section describes commands of the Internet Protocol (IP) version 4.
6.1.1
The "show" commands
This section describes commands with which you display various settings.
With the command
configuration mode.
To do this, you replace
Example
do show cli-console-timeout
6.1.1.1
show ip dns
Description
This command shows information about the DNS client, for example the status of the DNS
client and parameters for querying the DNS server.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show ip dns
Result
Information on the DNS client is displayed.
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
do [command]
[command]
or
cli#
you can execute the "show" commands in every
with the "show" command that you want to execute.
6
171