Summary of Contents for Siemens SIMATIC NET SCALANCE W700 Series
Page 1
Approvals for SCALANCE ___________________ Approvals SCALANCE W700 802.11n W780 / W740 802.11n Approvals for SCALANCE ___________________ W788C / W786C 802.11n Approvals for SCALANCE ___________ W760 / W720 / W770 / W730 SIMATIC NET 802.11n Industrial Wireless LAN Approvals SCALANCE W700 802.11n Reference Manual 11/2014...
Page 2
Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.
Approvals for SCALANCE W780 / W740 802.11n Note Issued approvals on the type plate of the device The specified approvals apply only when the corresponding mark is printed on the product. You can check which of the following approvals have been granted for your product by the markings on the type plate.
Page 6
Approvals for SCALANCE W780 / W740 802.11n 1.1 General approvals Abbreviations used Some approvals apply only to certain devices or series. In such situations, the designations of the products are shortened to avoid having to list all the type designations. The following table shows how the abbreviations relate to the product variants.
SIMATIC NET SCALANCE W748-2 M12 EEC SIMATIC NET SCALANCE W748-1 RJ-45 SIMATIC NET SCALANCE W748-1 M12 in the version put into circulation by Siemens AG conform to the regulations of the following European directive: ● 99/5/EC Directive of the European Parliament and of the Council on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity.
Page 8
Devices connected to the system must meet the relevant safety regulations. The EC Declaration of Conformity is available for the responsible authorities according to the above-mentioned EC Directive at the following address: Siemens Aktiengesellschaft Division Process Industries and Drives Postfach 4848 D-90026 Nürnberg...
Page 9
Approvals for SCALANCE W780 / W740 802.11n 1.1 General approvals Type Certification ID Order number: Order number US variant: W788-1 RJ-45 RAPN-W1-RJ-E3 6GK 5788-1FC00-0AA0 6GK 5788-1FC00-0AB0 W788-2 RJ-45 RAPN-W2-RJ-E3 6GK5 788-2FC00-0AA0 6GK5 788-2FC00-0AB0 W788-1 M12 RAPN-W1-M12-E3 6GK5 788-1GD00-0AA0 6GK5 788-1GD00-0AB0 W788-2 M12 RAPN-W2-M12-E3 6GK5 788-2GD00-0AA0...
Page 10
Approvals for SCALANCE W780 / W740 802.11n 1.1 General approvals Approvals SCALANCE W700 802.11n Reference Manual, 11/2014, C79000-G8976-C392-01...
Page 11
Approvals for SCALANCE W780 / W740 802.11n 1.1 General approvals Approvals SCALANCE W700 802.11n Reference Manual, 11/2014, C79000-G8976-C392-01...
Page 12
Area". You will find this document • on the data medium that ships with some devices. • on the Internet pages of Siemens Industry Online Support (http://support.automation.siemens.com/ww). Enter the document identification number C234 as the search term. SIMATIC NET products meet the requirements of the EC directive:94/9/EC "Equipment and Protective Devices for Use in Potentially Explosive Atmospheres".
Page 13
Approvals for SCALANCE W780 / W740 802.11n 1.1 General approvals The product meets the requirements of the standards: ● Factory Mutual Approval Standard Class Number 3611 ● FM Hazardous (Classified) Location Electrical Equipment: Non Incendive / Class I / Division 2 / Groups A,B,C,D / T4 and Non Incendive / Class I / Zone 2 / Group IIC / T4 cULus Approval for Information Technology Equipment cULus Listed I.
Page 14
___________________________________________________________________________ Notice Changes or modifications made to this equipment not expressly approved by SIEMENS may void the FCC authorization to operate this equipment. ___________________________________________________________________________ IEEE 802.11b or g operation of this product in the USA is firmware-limited to channels 1 through 11.
Page 15
Approvals for SCALANCE W780 / W740 802.11n 1.1 General approvals ___________________________________________________________________________ Notice For use of DFS channels ● Use of the RCoax Cable Antenna 6XV1875-2D is not permitted in channels which require dynamic frequency selection (DFS). ● Any installation of either a master or a client device within 35 km of a TDWR (Terminal Doppler Weather Radar) location shall be separated by at least 30 MHz (center-to-center) from the TDWR operating frequency.
Page 16
Approvals for SCALANCE W780 / W740 802.11n 1.1 General approvals chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication.
Page 17
Approvals for SCALANCE W780 / W740 802.11n 1.1 General approvals This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
Page 18
Approvals for SCALANCE W780 / W740 802.11n 1.1 General approvals Approval in Brazil From the SCALANCE W786-x series, the following devices are approved for Brazil: Type Order number EAPN number W786-1 RJ-45 6GK5 786-1FC00-0AA0 EAPN-W1-RJ-E3 W786-2 RJ-45 6GK5 786-2FC00-0AA0 EAPN-W2-RJ-E3 W786C-2 RJ-45 6GK5 786-2FC00-1AA0 EAPN-W2-RJ-E3...
Page 19
Approvals for SCALANCE W780 / W740 802.11n 1.1 General approvals The listed devices are approved in Brazil under the following certification numbers: Este equipamento opera em caráter secundário, isto, ist é, não tem direito à proteção contra interferência prejudicial, mesmo de estações do mesmo tipo e não pode causar interferência a sistemas operando em caráter primário.
The diamond symbol (♦) identifies all countries for which there was no approval at the time these operating instructions were written. The current status of the approvals can be found on the Internet at the following address: http://www.siemens.com/funkzulassungen Column Meaning...
Page 21
Approvals for SCALANCE W780 / W740 802.11n 1.2 National approvals Country Mode (EIRP) Belgium 11g 11n 2412 100 mW Indoor + outdoor Bosnia and Her- zegovina 2472 Bulgaria 11a 11n 5180 200 mW Indoor only Denmark Germany 5240 Estonia 11a 11n 5260 200 mW Indoor only Finland...
Page 22
Approvals for SCALANCE W780 / W740 802.11n 1.2 National approvals Country Mode (EIRP) Angola 11g 11n 2412 100 mW Indoor + outdoor 2472 11a 11n 5180 200 mW Indoor only 5240 11a 11n 5260 200 mW Indoor only DFS + TPC 5320 5500 1000 mW Indoor + outdoor...
Page 23
Approvals for SCALANCE W780 / W740 802.11n 1.2 National approvals Country Mode (EIRP) Australia 11g 11n 2412 100 mW Indoor + outdoor New Zealand 2472 11a 11n 5180 200 mW Indoor only 5240 11a 11n 5260 200 mW Indoor only DFS + TPC 5320 11a 11n...
Page 24
Approvals for SCALANCE W780 / W740 802.11n 1.2 National approvals Country Mode (EIRP) Brazil 11g 11n 2412 4000 mW Indoor + outdoor 2472 11a 11n 5180 200 mW Indoor only 5320 5500 1000 mW Indoor + outdoor 5700 5745 4000 mW Indoor + outdoor 5825 Chile 11g 11n...
Page 25
Approvals for SCALANCE W780 / W740 802.11n 1.2 National approvals Country Mode (EIRP) Hong Kong 11g 11n 2412 100 mW Indoor + outdoor 2472 11a 11n 5180 200 mW Indoor only 5240 11a 11n 5260 200 mW Indoor only DFS + TPC 5320 5500 1000 mW Indoor + outdoor...
Page 26
Approvals for SCALANCE W780 / W740 802.11n 1.2 National approvals Country Mode (EIRP) Japan 11g 11n 2412 200 mW Indoor + outdoor 2472 5040 200 mW Indoor + outdoor 5080 11a 11n 5180 200 mW Indoor only 5240 11a 11n 5260 200 mW Indoor only DFS + TPC...
Approvals for SCALANCE W788C / W786C 802.11n Note Issued approvals on the type plate of the device The specified approvals apply only when the corresponding mark is printed on the product. You can check which of the following approvals have been granted for your product by the markings on the type plate.
SIMATIC NET SCALANCE W788C-2 RJ-45 SIMATIC NET SCALANCE W788C-2 M12 SIMATIC NET SCALANCE W788C-2 M12 EEC in the version put into circulation by Siemens AG conform to the regulations of the following European directive: ● 99/5/EC Directive of the European Parliament and of the Council on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity.
Page 39
Devices connected to the system must meet the relevant safety regulations. The EC Declaration of Conformity is available for the responsible authorities according to the above-mentioned EC Directive at the following address: Siemens Aktiengesellschaft Division Process Industries and Drives Postfach 4848 D-90026 Nürnberg...
Page 40
Approvals for SCALANCE W788C / W786C 802.11n 2.1 General approvals Approvals SCALANCE W700 802.11n Reference Manual, 11/2014, C79000-G8976-C392-01...
Page 41
Approvals for SCALANCE W788C / W786C 802.11n 2.1 General approvals Approvals SCALANCE W700 802.11n Reference Manual, 11/2014, C79000-G8976-C392-01...
Page 42
Area". You will find this document • on the data medium that ships with some devices. • on the Internet pages of Siemens Industry Online Support (http://support.automation.siemens.com/ww). Enter the document identification number C234 as the search term. SIMATIC NET products meet the requirements of the EC directive:94/9/EC "Equipment and Protective Devices for Use in Potentially Explosive Atmospheres".
Page 43
___________________________________________________________________________ Notice Changes or modifications made to this equipment not expressly approved by SIEMENS may void the FCC authorization to operate this equipment. ___________________________________________________________________________ IEEE 802.11b or g operation of this product in the USA is firmware-limited to channels 1 through 11.
Page 44
Approvals for SCALANCE W788C / W786C 802.11n 2.1 General approvals However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ●...
Page 45
Approvals for SCALANCE W788C / W786C 802.11n 2.1 General approvals NEMA TS2 The product meets the requirements of the standard NEMA TS2 (Traffic Controller Assemblies with NTCIP Requirements) SCALANCE W788C-2 M12 EEC 6GK5788-2GD00-1TA0 RSS-210 of Industry Canada for SCALANCE W786-x This device complies with Industry Canada licence-exempt RSS standard(s).
Page 46
Approvals for SCALANCE W788C / W786C 802.11n 2.1 General approvals RSS-210 of Industry Canada for SCALANCE W7x8 This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Page 47
Approvals for SCALANCE W788C / W786C 802.11n 2.1 General approvals Approvals in Argentina Devices of the SCALANCE W786-x series are approved in Argentina under the following certification numbers: Certification ID Certification number EAPN-W1-RJ-E3 CNC: C-11549 EAPN-W2-RJ-E3 CNC: C-11536 EAPN-W2-RJ-I3 CNC: C-11564 EAPN-W2-SFP-E3 CNC: C-11547 Devices of the SCALANCE W788-x series are approved in Argentina under the following...
Page 48
Approvals for SCALANCE W788C / W786C 802.11n 2.1 General approvals From the SCALANCE W7x8 series, the following devices are approved for Brazil: Type Order number RAPN number W788-1 RJ-45 6GK 5788-1FC00-0AA0 RAPN-W1-RJ-E3 W788-2 RJ-45 6GK5 788-2FC00-0AA0 RAPN-W2-RJ-E3 W788-1 M12 6GK5 788-1GD00-0AA0 RAPN-W1-M12-E3 W788-2 M12 6GK5 788-2GD00-0AA0...
The diamond symbol (♦) identifies all countries for which there was no approval at the time these operating instructions were written. The current status of the approvals can be found on the Internet at the following address: http://www.siemens.com/funkzulassungen Column Meaning...
Page 50
Approvals for SCALANCE W788C / W786C 802.11n 2.2 National approvals Country Mode (EIRP) Belgium 11g 11n 2412 100 mW Indoor + outdoor Bulgaria Denmark 2472 Germany 11a 11n 5180 200 mW Indoor only Estonia Finland 5240 France 11h 11n 5260 200 mW Indoor only Greece DFS + TPC...
Page 51
Approvals for SCALANCE W788C / W786C 802.11n 2.2 National approvals Country Mode (EIRP) Angola 11g 11n 2412 100 mW Indoor + outdoor 2472 11a 11n 5180 200 mW Indoor only 5240 11h 11n 5260 200 mW Indoor only DFS + TPC 5320 5500 1000 mW Indoor + outdoor...
Page 52
Approvals for SCALANCE W788C / W786C 802.11n 2.2 National approvals Country Mode (EIRP) Brazil 11g 11n 2412 4000 mW Indoor + outdoor 2472 11a 11n 5180 200 mW Indoor only 5320 5500 1000 mW Indoor + outdoor 5700 5745 4000 mW Indoor + outdoor 5825 Chile 11g 11n...
Page 53
Approvals for SCALANCE W788C / W786C 802.11n 2.2 National approvals Country Mode (EIRP) India 11g 11n 2412 100 mW Indoor + outdoor 2472 11a 11n 5180 200 mW Indoor only 5240 11h 11n 5260 200 mW Indoor only DFS + TPC 5320 11a 11n 5745...
Approvals for SCALANCE W760 / W720 / W770 / W730 802.11n Note Issued approvals on the type plate of the device The specified approvals apply only when the corresponding mark is printed on the product. You can check which of the following approvals have been granted for your product by the markings on the type plate.
SIMATIC NET SCALANCE W774-1 RJ-45 SIMATIC NET SCALANCE W774-1 M12 EEC SIMATIC NET SCALANCE W734-1 RJ-45 in the version put into circulation by Siemens AG conform to the regulations of the following European directives: ● 99/5/EC Directive of the European Parliament and of the Council on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity.
Page 63
Approvals for SCALANCE W760 / W720 / W770 / W730 802.11n 3.1 General approvals Siemens Aktiengesellschaft Division Process Industries and Drives Postfach 4848 D-90026 Nürnberg This declaration certifies compliance with the directives named above, but does not guarantee any specific properties.
Page 66
Area". You will find this document • on the data medium that ships with some devices. • on the Internet pages of Siemens Industry Online Support (http://support.automation.siemens.com/ww). Enter the document identification number C234 as the search term. SIMATIC NET products meet the requirements of the EC directive:94/9/EC "Equipment and Protective Devices for Use in Potentially Explosive Atmospheres".
Page 67
___________________________________________________________________________ Notice Changes or modifications made to this equipment not expressly approved by SIEMENS may void the FCC authorization to operate this equipment. ___________________________________________________________________________ IEEE 802.11b or g operation of this product in the USA is firmware-limited to channels 1 through 11.
Page 68
Approvals for SCALANCE W760 / W720 / W770 / W730 802.11n 3.1 General approvals However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ●...
Page 69
Approvals for SCALANCE W760 / W720 / W770 / W730 802.11n 3.1 General approvals CSA Information Technology Equipment CSA Certification Mark Canadian Standard Association CSA C22.2 No. 60950-1-03 RSS-210 of Industry Canada This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Page 70
Approvals for SCALANCE W760 / W720 / W770 / W730 802.11n 3.1 General approvals Approvals for Argentina Devices of the SCALANCE W760/W720 series are approved in Argentina under the following certification number: Certification ID Certification number ELN-W1-RJ-E1 CNC: C-13172 Devices of the SCALANCE W770/W730 series are approved in Argentina under the following certification numbers: Certification ID Certification number...
The diamond symbol (♦) identifies all countries for which there was no approval at the time these operating instructions were written. The current status of the approvals can be found on the Internet at the following address: http://www.siemens.com/funkzulassungen Column Meaning...
Page 72
Approvals for SCALANCE W760 / W720 / W770 / W730 802.11n 3.2 National approvals Country Mode (EIRP) Belgium 11g 11n 2412 100 mW Indoor + outdoor Bosnia and Her- zegovina 2472 Bulgaria 11a 11n 5180 200 mW Indoor only Denmark Germany 5240 Estonia...
Page 73
Approvals for SCALANCE W760 / W720 / W770 / W730 802.11n 3.2 National approvals Country Mode (EIRP) Angola 11g 11n 2412 100 mW Indoor + outdoor 2472 11a 11n 5180 200 mW Indoor only 5240 11a 11n 5260 200 mW Indoor only DFS + TPC 5320 5500...
Page 74
Approvals for SCALANCE W760 / W720 / W770 / W730 802.11n 3.2 National approvals Country Mode (EIRP) Bahrain 11g 11n 2412 100 mW Indoor + outdoor 2472 11a 11n 5180 200 mW Indoor only 5240 11a 11n 5260 200 mW Indoor only DFS + TPC 5320 5745...