no snmp filterprofile<profile-name><OIDTree>
The parameters have the following meaning:
Parameters
profile-name
OIDTree
Result
The filter is deleted.
Further notes
You create a filter with the
You display the created filter with the
6.6.2.10
snmp group
Description
With this command, you configure the details of an SNMP group.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
snmp group <GroupName> user <UserName>security-model{v1|v2c|v3}
[{volatile|nonvolatile}]
The parameters have the following meaning:
Parameter
GroupName
user
UserName
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
Description
Name of the filter profile
Object ID
snmp filterprofile
show snmp filter table
Description
Name of the group
Keyword for the user name
Name of the user
Range of values
max. 32 characters
Path information of the MIB tree
command.
command.
Range of values / note
max. 32 characters
-
max. 32 characters
Network protocols
6.6 SNMP
237