Logon Idx Group - Siemens SCALANCE S615 Configuration Manual

Functions specific to SCALANCE
3.4 SRS
Further notes
You display this setting and other information with the
You configure the user data for the destination server with the commands
logon idx name
3.4.3.6

logon idx group

Note
This command is only available with a KEY-PLUG.
Description
With this command, you change the group name for access to a specific destination server.
Requirement
You are in the SRS configuration mode.
The command prompt is as follows:
cli(config-srs)#
Syntax
Call up the command with the following parameters:
logon idx <num(1-100)> group <string(255)>
The parameters have the following meaning:
Parameter
num
group
string
Result
The group name is changed.
Further notes
You display this setting and other information with the
You create a destination server entry with the
104
and .
logon idx pw
Description
Number corresponding to a specific
destination server.
Keyword for the group name
Group name
show srs overview
Range of values / note
Enter the required number.
-
Enter the group name.
Maximum of 255 characters
show srs overview
command.
logon addr
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
command.
,
logon idx group
command.