Snmp V1-V2 Readonly; No Snmp V1-V2 Readonly - Siemens SCALANCE S615 Configuration Manual

Network protocols
6.6 SNMP
6.6.2.18

snmp v1-v2 readonly

Description
With this command, you block write access for SNMPv1 and SNMPv2 PDUs.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameters:
snmp v1-v2 readonly
Result
Write access for SNMPv1 and SNMPv2 PDUs is blocked.
Further notes
You release write access for SNMPv1 and SNMPv2 PDUs with the
command.
6.6.2.19

no snmp v1-v2 readonly

Description
With this command, you enable write access for SNMPv1 and SNMPv2 PDUs.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameters:
no snmp v1-v2 readonly
246
no snmp v1-v2 readonly
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02