Ipv4Rule Show-Rules; Prerule Ipv4 Show-Int - Siemens SCALANCE S615 Configuration Manual

Security and authentication
9.2 Firewall
Result
The IPv4 firewall rules are listed.
Further notes
You display the IPv4 firewall rule with the
9.2.4.20

ipv4rule show-rules

Description
With this command, you display the available IPv4 firewall rules.
Requirement
You are in the FIREWALL configuration mode.
The command prompt is as follows:
cli(config-fw)#
Syntax
Call the command without parameter assignment:
ipv4rule show-rules
Result
The IPv4 firewall rules are listed.
Further notes
You display further information with the
You display the IPv4 firewall rule with the
9.2.4.21

prerule ipv4 show-int

Description
With this command, you list the available interfaces.
Requirement
You are in the FIREWALL configuration mode.
The command prompt is as follows:
332
command.
ipv4rule
show firewall ip-rules ipv4
command.
ipv4rule
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
command.