Lifetime - Siemens SCALANCE S615 Configuration Manual

Further notes
You display this setting and other information with the
You disable the use of the default list with the
9.3.8.8

lifetime

Description
With this command, you configure a period to specify the lifetime of the agreed keys. When
the time expires, the key is renegotiated.
Requirement
You are in the IPSEC PHASE configuration mode.
The command prompt is as follows:
cli(config-conn-phs2)#
Syntax
Call up the command with the following parameters:
lifetime <min(10-16666666)>
The parameter has the following meaning:
Parameter
min
Result
The period of time is configured.
Further notes
You display this setting and other information with the
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
no default-ciphers
Description
Period
Security and authentication
show ipsec conn-phase2
command.
Range of values / note
Specify the period of time in
minutes.
show ipsec conn-phase2
9.3 IPsec VPN
command.
command.
403