No Password - Siemens SCALANCE S615 Configuration Manual

2.2.5.7

no password

Description
With this command, you disable the password for a file.
Requirement
You are in the LOADSAVE configuration mode.
The command prompt is as follows:
cli(config-loadsave)#
Syntax
Call up the command with the following parameters:
no password {showfiles|filetype<filetype>}
The parameters have the following meaning:
Parameter
showfiles
filetype
filetype
Result
The password for the file is disabled.
Further notes
You enable the password for the user certificate with the
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
Description
Shows the available files
Shows that the file type follows that will be loaded
Name of the file type
Configuration
2.2 Load and Save
Values
-
-
max. 100 characters
command.
password
79