Logon Idx Pw - Siemens SCALANCE S615 Configuration Manual

Functions specific to SCALANCE
3.4 SRS
3.4.3.8

logon idx pw

Note
This command is only available with a KEY-PLUG.
Description
With this command, you change the password for access to a specific destination server.
Requirement
You are in the SRS configuration mode.
The command prompt is as follows:
cli(config-srs)#
Syntax
Call up the command with the following parameters:
logon idx <num(1-100)> pw <string(100)>
The parameters have the following meaning:
Parameter
num
pw
string
Result
The password for the access is changed.
Further notes
You change the user name with the
You display the numbers of the destination servers with the
106
Description
Number corresponding to a specific
destination server.
Keyword for the password
Password
logon idx name
Range of values / note
Enter the required number.
-
Specify the user name.
Maximum of 100 characters
command.
logon show-idx
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
command.