Show Firewall Information; Show Firewall Ip-Protocols - Siemens SCALANCE S615 Configuration Manual
Simatic net industrial ethernet security command line interface
Hide thumbs
Also See for SCALANCE S615:
- Getting started (44 pages) ,
- Manual (36 pages) ,
- Operating instructions manual (80 pages)
Table of Contents
Advertisement
Security and authentication
9.2 Firewall
9.2.2.2
show firewall information
Description
This command shows the configuration of the firewall.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameter assignment:
show firewall information
Result
The configuration is displayed.
9.2.2.3
show firewall ip-protocols
Description
This command displays the configured protocols.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameter assignment:
show firewall ip-protocols
Result
The configured protocols are displayed.
310
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
Hide quick links:
Advertisement
Table of Contents
