Snmp Filterprofile - Siemens SCALANCE S615 Configuration Manual

Syntax
Call up the command with the following parameters:
no snmp community index <CommunityIndex>
The parameter has the following meaning:
Parameter
CommunityIndex
Result
The details of an SNMP community are deleted.
Further notes
You configure the details of an SNMP community with the
You show the details of an SNMP community with the
You show the status information of the SNMP communication with the
6.6.2.8

snmp filterprofile

Description
With this command, you configure a filter that describes the access rights to the MIB tree.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
snmp filterprofile <profile-name> <OIDTree> [mask<OIDMask>]
The parameters have the following meaning:
Parameter
profile-
name
OIDTree
mask
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
Description
Name of the community
{included|excluded}[{volatile|nonvolatile}]
Description
Name of the filter profile
Object ID
Keyword for the OID mask
Network protocols
Range of values / note
max. 32 characters
snmp community index
command.
show snmp community
show snmp
Range of values
max. 32 characters
Path information of the MIB tree
-
6.6 SNMP
command.
command.
235