9.3.3.3
no connection all
Description
With this command, you delete all VPN connections.
Requirement
● The VPN connection have been created and are not being used anywhere.
● You are in the IPSEC CONNECTION configuration mode.
Syntax
Call the command without parameter assignment:
no connection all
Result
All VPN connections are deleted.
Further notes
You display the VPN connection with the
9.3.3.4
crl-policy
Description
With this command, you specify whether the validity of the certificates is checked based on
the CRL (Certificate Revocation List).
Requirement
You are in the IPSEC configuration mode.
The command prompt is as follows:
cli(config-ipsec)#
Syntax
Call up the command with the following parameters:
CRL-policy <yes|no|ifuri>
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
The command prompt is as follows:
cli(config-ipsec-conn-X)#
command.
connection name
Security and authentication
9.3 IPsec VPN
361