5.1.3.3
shutdown complete
Description
With this command, you shut down the interface.
Requirement
You are in the Interface configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call the command without parameters:
shutdown complete
Result
The Interface is shut down. A connection continues to be indicated if a switch port is turned
off. The LED for the port status flashes 3 times cyclically. However no data is sent or
received.
Further notes
You activate the interface with the
You can display the status of this function and other information with the
interfaces
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
command.
command.
no shutdown
Network structures
5.1 VLAN
show
157