9.4.2.2
show-info
Description
This command shows information on the relevant certificate. e.g. the serial number.
Requirement
● You are in the CERT configuration mode.
The command prompt is as follows:
cli(config-cert)#
Syntax
Call up the command with the following parameters:
show-info idx <integer(1-100)>}
The parameter has the following meaning:
Parameter
idx
Result
The information on the certificate is displayed.
Further notes
You display the indexes of the certificate with the
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
Description
Number corresponding to a specific certificate.
Security and authentication
Range of values / note
Enter the required number.
1 ... 100
command.
show idx
9.4 Certificates
409