Clear Seclog; Fault Report Ack - Siemens SCALANCE S615 Configuration Manual

Diagnostics
10.1 Event and fault handling
10.1.5

clear seclog

Description
With this command, you delete the content of the security log.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameters:
clear seclog
Result
The content of the security log is deleted.
10.1.6

fault report ack

Description
With this command, you acknowledge (delete) the messages of the "Cold/Warm start" event.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call up the command with the following parameter:
fault report ack <fault-state-id>
420
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02