Rmend Name - Siemens SCALANCE S615 Configuration Manual

Security and authentication
9.3 IPsec VPN
The parameters have the following meaning:
Parameter
subnet
dns
For information on identifiers of addresses and interfaces, refer to the section Interface
identifiers and addresses (Page 25).
Result
The local subnet is configured.
Further notes
You display this setting and other information with the
9.3.5.4

rmend name

Description
With this command, you specify the VPN remote station for the IPsec connection.
Requirement
● The VPN remote station has been created.
● You are in the IPSEC CONNECTION configuration mode.
The command prompt is as follows:
cli(onfig-conn-X)#
Syntax
Call up the command with the following parameters:
rmend name <name(128)>
The parameter has the following meaning:
Parameter
name
Result
The VPN remote station has been configured.
374
Description
Local subnet address
DNS host name
Description
Name of the VPN remote station
Range of values / note
Specify the local subnet in CIDR notation.
The local network can be a single PC or another sub-
set of the local network.
show ipsecvpn connections
Range of values / note
Enter a valid name.
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
command.