Show Snmp Targetparam; Show Snmp Tcp - Siemens SCALANCE S615 Configuration Manual

6.6.1.10

show snmp targetparam

Description
This command shows the configured SNMP target parameters.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show snmp targetparam
Result
The configured SNMP target parameters are displayed.
6.6.1.11

show snmp tcp

Description
This command shows the configuration for SNMP via TCP.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show snmp tcp
Result
The configuration for SNMP via TCP is displayed.
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
or
cli#
or
cli#
Network protocols
6.6 SNMP
227