Functions specific to SCALANCE
3.4 SRS
cli(config-srs)#
Syntax
Call the command without parameter assignment:
shutdown
Result
The use of SRS is disabled.
Further notes
You enable the use with the
3.4.3.11
no shutdown
Note
This command is only available with a KEY-PLUG.
Description
With this command, you enable the use of SRS.
Requirement
You are in the SRS configuration mode.
The command prompt is as follows:
cli(config-srs)#
Syntax
Call the command without parameter assignment:
no shutdown
Result
The use of SRS is enabled.
Further notes
You disable use with the
108
command.
no shutdown
command.
shutdown
Configuration Manual, 06/2015, C79000-G8976-C406-02
SCALANCE S615 Command Line Interface