No Ssh-Server - Siemens SCALANCE S615 Configuration Manual

Network protocols
6.11 SSH server
6.11.2.2

no ssh-server

Description
With this command, you disable the SSH protocol on the device.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameters:
no ssh-server
Result
The SSH protocol is disabled on the device.
Further notes
You enable the SSH protocol with the
276
command.
ssh-server
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02