Security and authentication
9.2 Firewall
Syntax
Call the command without parameter assignment:
shutdown
Result
The firewall is disabled.
Further notes
You enable the firewall with the
9.2.4.44
no shutdown
Description
With this command, you enable the firewall.
Requirement
You are in the FIREWALL configuration mode.
The command prompt is as follows:
cli(config-fw)#
Syntax
Call the command without parameter assignment:
no shutdown
Result
The firewall is enabled.
Further notes
You disable the firewall with the
354
command.
no shutdown
command.
shutdown
Configuration Manual, 06/2015, C79000-G8976-C406-02
SCALANCE S615 Command Line Interface