Shutdown; Commands In The Ipsec Remote End Configuration Mode - Siemens SCALANCE S615 Configuration Manual

Security and authentication
9.3 IPsec VPN
You display this setting and other information with the show ipsecvpn information command.
9.3.3.10

shutdown

Description
With this command, you disable the IPsec method for VPN.
Requirement
You are in the IPSEC configuration mode.
The command prompt is as follows:
cli(config-ipsec)#
Syntax
Call the command without parameter assignment:
shutdown
Result
The IPsec method is disabled.
Further notes
You enable the IPsec method with the
You display this setting and other information with the show ipsecvpn information command.
9.3.4

Commands in the IPSEC REMOTE END configuration mode

This section describes commands that you can call up in the IPSEC REMOTE END
configuration mode.
In the global configuration mode, enter the
● If you exit the IPSEC REMOTE END configuration mode with the
return to the Global configuration mode.
● If you exit the IPSEC REMOTE END configuration mode with the
return to the Privileged EXEC mode.
366
command.
no shutdown
command to change to this mode.
remote end
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
command, you
exit
command, you
end