System Time/Ntp - Siemens SINAUT MD741-1 System Manual

Local interface
4.5

System Time/NTP

This is where you set the system time for the SINAUT MD741-1. This system time
is:
used as a time stamp for all log entries, and
●
serves as a time basis for all time-controlled functions.
●
Select the year, month, day, hour and minute.
Figure 4-8
Activate NTP synchronization
The SINAUT MD741-1 can also obtain the system time from a time server via NTP
(= Network Time Protocol). There are a number of time servers on the Internet that
can be used to obtain the current time very precisely via NTP.
Local timezone / region
The NTP time servers communicate the UTC (= Universal Time Coordinated). To
specify the time zone, select a city near the location near where the SINAUT
MD741-1 will be operating. The time in this time zone will then be used as the
system time.
46
System > System Time/NTP
SINAUT MD741-1
C79000- G8976-C212