Further notes
You display the available service names with the
You create the service with the
You display this setting and other information with the
command.
9.2.4.42
service show-names
Description
With this command, you display the available service names.
Requirement
You are in the FIREWALL configuration mode.
The command prompt is as follows:
cli(config-fw)#
Syntax
Call the command without parameter assignment:
service show-names
Result
The service names are listed.
Further notes
You create a protocol with the
9.2.4.43
shutdown
Description
With this command, you disable the firewall.
Requirement
You are in the FIREWALL configuration mode.
The command prompt is as follows:
cli(config-fw)#
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
service show-names
command.
service cr name
command.
service cr name
Security and authentication
command.
show firewall ip-services
9.2 Firewall
353