Mirror Interface - Allied Telesis AR2050V Command Reference Manual

P M C
ORT IRRORING OMMANDS

MIRROR INTERFACE

mirror interface
Overview Use this command to define a mirror port and mirrored (monitored) ports and
direction of traffic to be mirrored. The port for which you enter interface mode will
be the mirror port.
The destination port is removed from all VLANs, and no longer participates in other
switching.
Use the no variant of this command to disable port mirroring by the destination
port on the specified source port.
mirror interface <source-port-list> direction
Syntax
{both|receive|transmit}
no mirror interface <source-port-list>
Mode Interface Configuration
Usage Use this command to send traffic to another device connected to the mirror port
for monitoring.
For more information, see the
Guide.
A mirror port cannot be associated with a VLAN. If a switch port is configured to be
a mirror port, it is automatically removed from any VLAN it was associated with.
This command can only be applied to a single mirror (destination) port, not to a
range of ports, nor to a static or dynamic channel group. Do not apply multiple
interfaces with an interface command before issuing the mirror interface
command. One interface may have multiple mirror interfaces.
C613-50186-01 Rev B
Parameter
<source-port-list> The source switch ports to mirror. A port-list can be:
direction
both
receive
transmit
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
• a port (e.g. port1.0.2)
• a continuous range of ports separated by a hyphen, e.g.
port1.0.1-1.0.2
• a comma-separated list of ports and port ranges, e.g.
port1.0.1,port1.0.4-1.0.6
The source port list cannot include dynamic or static
channel groups (link aggregators).
Specifies whether to mirror traffic that the source port
receives, transmits, or both.
Mirroring traffic both received and transmitted by the
source port.
Mirroring traffic received by the source port.
Mirroring traffic transmitted by the source port.
Mirroring Feature Overview and Configuration
403