Allied Telesis AR2050V Command Reference Manual page 401

USB C M C
ELLULAR ODEM OMMANDS
-
USB MODE SWITCH
Default Some USB devices will use a default mode switch configuration file if one is not
specified.
Mode Global Configuration
Usage Some USB devices must be explicitly told to switch to a compatible mode. The usb
mode-switch command does this by matching on a target device by its USB
vendor and product IDs, and executing a specified configuration file.
Additional parameters can be defined which specify other USB and SCSI
descriptors. These are useful if there are multiple devices that have the same
product and vendor IDs, but differ in the other parameters. The mode switch
configuration files must have the extension ".conf".
Examples To add a mode switch configuration for a USB device, use the commands:
awplus#
awplus(config)#
140c manufacturer HUAWEI file switch.conf
To remove a mode switch configuration for a USB device, use the commands:
awplus#
awplus(config)#
Related apn
Commands
chat-script
show cellular
show system usb
usb mode-switch
C613-50186-01 Rev B
Descriptio
Parameter n
file
Specify the mode switch config file to be used instead of the
default when the target device is inserted.
<file>
Mode switch configuration file URL with extension .conf.
configure terminal
usb mode-switch id 1 vendor-id 12d1 product-id
configure terminal
no usb mode-switch id 1
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
401