Clear Test Interface - Allied Telesis AR2050V Command Reference Manual

I T C
NTERFACE ESTING OMMANDS

CLEAR TEST INTERFACE

clear test interface
Overview This command clears test results and counters after issuing the
command. Test results and counters must be cleared before executing subsequent
test interface
clear test interface {<port-list>|all}
Syntax
Mode Privileged Exec
To clear the counters for port1.0.1 use the command:
Examples
awplus#
To clear the counters for all interfaces use the command:
awplus#
Related test interface
Commands
C613-50186-01 Rev B
commands.
Parameter Description
<port-list> The ports to test. A port-list can be:
• a switch port (e.g. port1.0.6)
• a continuous range of ports separated by a hyphen, e.g.
port1.0.1-port1.0.6
• a comma-separated list of the above, e.g.
port1.0.1,port1.0.5-1.0.6
The specified ports must exist.
all
All interfaces
clear test interface port1.0.1
clear test interface all
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
test interface
408