Allied Telesis AR2050V Command Reference Manual page 416

S C
WITCHING OMMANDS
BACKPRESSURE
To disable back pressure flow control on interface port1.0.2 enter the following
commands:
awplus#
awplus(config)#
awplus(config-if)#
Validation show running-config
Commands
show interface
Related duplex
Commands
C613-50186-01 Rev B
configure terminal
interface port1.0.2
backpressure off
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
416