Allied Telesis AR2050V Command Reference Manual page 381

I C
NTERFACE OMMANDS
SHOW INTERFACE
Figure 9-3:

awplus#show interface vlan1,vlan2
Interface vlan1
Scope: both
Link is UP, administrative state is UP
Hardware is VLAN, address is 0015.77e9.5c50
IPv4 address 192.168.1.1/24 broadcast 192.168.1.255
index 201 metric 1 mtu 1500
arp ageing timeout 300
<UP,BROADCAST,RUNNING,MULTICAST>
SNMP link-status traps: Disabled
Bandwidth 1g
input packets 295606, bytes 56993106, dropped 5, multicast packets 156
output packets 299172, bytes 67379392, multicast packets 0 broadcast packets 0
Time since last state change: 0 days 14:22:39

Interface vlan2
Scope: both
Link is DOWN, administrative state is UP
Hardware is VLAN, address is 0015.77e9.5c50
IPv4 address 192.168.2.1/24 broadcast 192.168.2.255
Description: ip_phone_vlan
index 202 metric 1 mtu 1500
arp ageing timeout 300
<UP,BROADCAST,MULTICAST>
SNMP link-status traps: Disabled
Bandwidth 1g
input packets 0, bytes 0, dropped 0, multicast packets 0
output packets 90, bytes 4244, multicast packets 0 broadcast packets 0
Time since last state change: 0 days 14:22:39
To display configuration and status information for br1, use the command:
awplus#
awplus#show interface br1
Interface br1
Link is UP, administrative state is UP
Hardware is Bridge
IPv6 address fe80::200:cdff:fe38:f7/64
index 33555969 metric 1 
MAC ageing time 300
<UP,BROADCAST,RUNNING,MULTICAST>
SNMP link-status traps: Disabled
input packets 0, bytes 0, dropped 0, multicast packets 0
output packets 3, bytes 218, multicast packets 0 broadcast packets 0
Time since last state change: 0 days 00:00:09
To display configuration and status information for eth1, use the command:
awplus#
C613-50186-01 Rev B
Example output from the show interface vlan1,vlan2 command
show interface br1
show interface eth1
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
381