Chat-Script - Allied Telesis AR2050V Command Reference Manual

USB C M C
ELLULAR ODEM OMMANDS
-
CHAT SCRIPT

chat-script

Overview Use this command to set a chat-script, instead of the default chat-script, to connect
to a 3G serial cellular network.
Use the no variant of this command to set the chat-script back to the default.
Syntax chat-script <file-name>
no chat-script <file-name>
Default The default chat-script is a built in chat-script that in most cases is sufficient for
connecting to a cellular network.
Mode Interface Configuration (Cellular)
Usage The chat-script file must have the file extension ".chat". The chat-script consists of
a sequence of expect-send pairs of strings. The send strings are AT (Hayes)
commands. Any occurrence of the string $APN in the chat-script will be
substituted with the Access Point Name (APN) configured on a cellular interface.
Examples To use a non-default chat-script, "connect.chat", use the commands:
awplus#
awplus(config)#
awplus(config-if)#
To use the default chat-script, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
Related apn
Commands
show cellular
show system usb
usb mode-switch
C613-50186-01 Rev B
Parameter Description
<file-name>
The path to the chat-script file (this file has to have a ".chat"
extension).
configure terminal
interface cellular0
configure terminal
interface cellular0
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
#chat-script connect.chat
#no chat-script
392