Table of Contents
Advertisement
USB C
M
C
ELLULAR
ODEM
OMMANDS
SHOW CELLULAR
show cellular
Overview
Use this command to display status information about 3G serial USB cellular
modems currently plugged into your AR-Series Firewall.
show cellular <cellular-interface-name>
Syntax
Parameter
<cellular-interface-name>
Default
None
Mode
Privileged Exec
Usage
If a cellular interface is specified, then the command only shows information for
the cellular modem associated with that interface. Different vendors, and models
of cellular modems often provide different sets of information:
•
•
Examples
To show status information about all cellular modems, use the command:
awplus#
Output
Figure 10-3: Example output from show cellular
awplus#show cellular
Interface cellular0
Manufacturer: huawei
Model ID: E1762
Revision ID: 11.126.10.00.74
Serial ID: 351553036840711
IMSI: 530011104647258
Signal Quality:
RSSI: -71 dBm
Bit Error Rate: (unknown)
Service Center Address:
Phone Number: +6421600600
Number Type: International
GPRS Mobile Station Class: Class A
Serial Port Configuration:
Baud rate: 115200
Character Format: 8-N-1
Parity: Space
C613-50186-01 Rev B
Description
Specify the name of a cellular interface. This option displays status
information for the cellular modem associated with that interface.
Vendor-specific information will not be displayed if the information is unable
to be obtained from the cellular modem.
For information that is common to most cellular modems, "(unknown)" will
be displayed if the information was not obtained successfully.
show cellular
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
395
- Quick Links:
- Introduction
- Configure Terminal
Hide quick links:
Advertisement
Table of Contents
