Show Mac Address-Table - Allied Telesis AR2050V Command Reference Manual

S C
WITCHING OMMANDS
-
SHOW MAC ADDRESS TABLE

show mac address-table

Overview Use this command to display the mac address-table for all configured VLANs.
show mac address-table
Syntax
Mode User Exec and Privileged Exec
Usage The show mac address-table command is only applicable to view a mac
address-table for Layer 2 switched traffic within VLANs.
Example To display the mac address-table, use the following command:
awplus#
Output See the below sample output captured when there was no traffic being switched:
See the sample output captured when packets were switched and mac addresses
were learned:
Note the new mac addresses learned for port1.0.4 and port1.0.6 added as
dynamic entries.
Note the first column of the output below shows VLAN IDs if multiple VLANs are
configured:
Also note manually configured static mac-addresses are shown to the right of the
type column:
C613-50186-01 Rev B
show mac address-table
awplus#show mac address-table

VLAN Port MAC
1 unknown 0000.cd28.0752
ARP - 0000.cd00.0000
awplus#show mac address-table

VLAN Port MAC
1 unknown 0000.cd28.0752
1 port1.0.6 0030.846e.9bf4
1 port1.0.4 0030.846e.bac7
ARP - 0000.cd00.0000
awplus#show mac address-table

VLAN Port MAC
1 unknown 0000.cd28.0752
1 port1.0.4 0030.846e.bac7
2 unknown 0000.cd28.0752
2 port1.0.6 0030.846e.9bf4
ARP - 0000.cd00.0000
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
State
static
static
State
static
dynamic
dynamic
static
State
static
dynamic
static

dynamic
static
436