USB C
M
C
ELLULAR
ODEM
OMMANDS
APN
apn
Overview
Use this command to set the Access Point Name (APN) to use to connect to a 3G
serial cellular network.
Use the no variant of this command to unset the APN.
Syntax
apn <access-point-name>
no apn <access-point-name>
Default
No APN is set
Mode
Interface Configuration (Cellular)
Usage
The APN has to be set in order to initiate the cellular network connection. Some
mobile network operators do not require a specific APN to be specified, in this case
any APN can be used.
Examples
To set the APN to www.example.com for a cellular interface, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
Output
Figure 10-1: Example output from the apn command
To unset the APN, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
Output
Figure 10-2: Example output from the no apn command
Related
chat-script
Commands
C613-50186-01 Rev B
Parameter
<access-point-name>
configure terminal
int cellular0
awplus#configure terminal
awplus(config)#int cellular0
awplus(config-if)#apn www.example.com
configure terminal
int cellular0
awplus#configure terminal
awplus(config)#int cellular0
awplus(config-if)#no apn
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
The APN to use to connect to a cellular network (for
example, www.example.com).
apn www.example.com
no apn
390