LLDP C
OMMANDS
SHOW LLDP STATISTICS INTERFACE
show lldp statistics interface
Overview
This command displays the LLDP statistics (packet and event counters) for
specified ports. If no port list is supplied, LLDP statistics for all ports are displayed.
show lldp statistics interface [<port-list>]
Syntax
Mode
User Exec and Privileged Exec
Examples
To display LLDP statistics information for all ports, use the command:
awplus#
To display LLDP statistics information for ports 1.0.1 and 1.0.6, use the command:
awplus#
Output
Table 64: Example output from the show lldp statistics interface command
C613-50170-01 Rev B
Parameter
Description
<port-list>
The ports for which the statistics are to be shown.
show lldp statistics interface
show lldp statistics interface port1.0.1,port1.0.6
awplus# show lldp statistics interface port1.0.1,port1.0.6
LLDP Packet and Event Counters:
port1.0.1
Frames:
Out ................... 27
In .................... 22
In Errored ............ 0
In Dropped ............ 0
TLVs:
Unrecognized .......... 0
Discarded ............. 0
Neighbors: New Entries ........... 3
Deleted Entries ....... 0
Dropped Entries ....... 0
Entry Age-outs ........ 0
port1.0.6
Frames:
Out ................... 15
In .................... 18
In Errored ............ 0
In Dropped ............ 0
TLVs:
Unrecognized .......... 0
Discarded ............. 0
Neighbors: New Entries ........... 1
Deleted Entries ....... 0
Dropped Entries ....... 0
Entry Age-outs ........ 0
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
2663