Day - Allied Telesis x510-28GTX Command Reference Manual

T C
RIGGER OMMANDS

DAY

day
Overview This command specifies the days or date that the trigger can activate on. You can
specify one of:
•
•
•
•
By default, the trigger can activate on any day.
day every-day
Syntax
day <1-31> <month> <2000-2035>
day <weekday>
Default every-day, so by default, the trigger can activate on any day.
Mode Trigger Configuration
Usage For example trigger configurations that use the day command, see "Restrict
Internet Access" and "Turn off Power to Port LEDs" in the
Overview and Configuration
Examples To permit trigger 55 to activate on the 1 October 2016, use the commands:
awplus#
awplus(config)#
awplus(config-trigger)#
C613-50170-01 Rev B
A specific date
A specific day of the week
A list of days of the week
every day
Parameter Description
every-day
Sets the trigger so that it can activate on any day.
<1-31>
Day of the month the trigger is permitted to activate on.
<month>
Sets the month that the trigger is permitted to activate on. Valid
keywords are: january, february, march, april, may, june, july,
august, september, october, november, and december.
<2000-2035>
Sets the year that the trigger is permitted to activate in.
<weekday>
Sets the days of the week that the trigger can activate on. You can
specify one or more week days in a space separated list. Valid
keywords are: monday, tuesday, wednesday, thursday, friday,
saturday, and sunday.
configure terminal
trigger 55
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Guide.
day 1 oct 2016
Triggers Feature
2742