Table of Contents
Advertisement
Chapter 9: Replacing Modules
Installing Fan
This procedure requires the following tool:
Modules
#2 Phillips-head screwdriver (not provided)
The illustrations show the installation of a fan module in FAN B slot on the
back panel. The procedure is the same for installing a module in FAN A
slot.
To install a fan module, perform the following procedure:
1. Remove the new fan module form its shipping box. Refer to Figure 93.
Figure 93. Removing the Fan Module from the Shipping Container
2. Align the fan module in the slot. Refer to Figure 94 on page 149.
148
Advertisement
Table of Contents
