Show Running-Config Ssh - Allied Telesis x510-28GTX Command Reference Manual

S S (SSH) C
ECURE HELL OMMANDS
-
SHOW RUNNING CONFIG SSH

show running-config ssh

Overview This command displays the current running configuration of Secure Shell (SSH).
show running-config ssh
Syntax
Mode Privileged Exec and Global Configuration
Example To display the current configuration of SSH, use the command:
awplus#
Output Figure 62-5: Example output from the show running-config ssh command
Table 5: Parameters in the output of the show running-config ssh command
C613-50170-01 Rev B
show running-config ssh
!
ssh server session-timeout 600 
ssh server login-timeout 30
ssh server allow-users manager 192.168.1.*
ssh server allow-users john 
ssh server deny-user john*.a-company.com
ssh server
Parameter
ssh server
ssh server v2
ssh server<port>
no ssh server scp
no ssh server sftp
ssh server
session-timeout
ssh server login-timeout
ssh server max-startups
no ssh server
authentication password
no ssh server
authentication publickey
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
SSH server is enabled.
SSH server is enabled and only support SSHv2.
SSH server is enabled and listening on the
specified TCP port.
SCP service is disabled.
SFTP service is disabled.
Configure the server session timeout.
Configure the server login timeout.
Configure the maximum number of concurrent
sessions waiting authentication.
Password authentication is disabled.
Public key authentication is disabled.
2712