Show Crypto Key Pubkey-Chain Userkey - Allied Telesis x510-28GTX Command Reference Manual

S S (SSH) C
ECURE HELL OMMANDS
-
SHOW CRYPTO KEY PUBKEY CHAIN USERKEY

show crypto key pubkey-chain userkey

Overview This command displays the public keys registered with the SSH server for SSH
users. These keys allow remote users to access the device using public key
authentication. By using public key authentication, users can access the SSH server
without providing password.
show crypto key pubkey-chain userkey <username> [<1-65535>]
Syntax
Default Display all keys.
Mode User Exec, Privileged Exec and Global Configuration
To display the public keys for the user manager that are registered with the SSH
Example
server, use the command:
awplus#
Output Figure 62-3: Example output from the show crypto key public-chain userkey
Table 3: Parameters in the output of the show crypto key userkey command
Related crypto key pubkey-chain userkey
Commands
C613-50170-01 Rev B
Parameter Description
<username>
User name of the remote SSH user whose keys you wish to display.
The username must begin with a letter. Valid characters are all
numbers, letters, and the underscore, hyphen and full stop symbols.
<1-65535>
Key identifier for a specific key.
show crypto key pubkey-chain userkey manager
command
No Type Bits Fingerprint
----------------------------------------------------------------
1 dsa 1024 2b:cc:df:a8:f8:2e:8f:a4:a5:4f:32:ea:67:29:78:fd
2048 6a:ba:22:84:c1:26:42:57:2c:d7:85:c8:06:32:49:0e 
2 rsa
Parameter Description
No
Number ID of the key.
Type
The algorithm used to generate the key.
Bits
Length in bits of the key.
Fingerprint
Checksum value for the key.
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
2710