Show Running-Config Sflow - Allied Telesis x510-28GTX Command Reference Manual

F C
S LOW OMMANDS
-
SHOW RUNNING CONFIG SFLOW

show running-config sflow

Overview This command displays the running system information specific to the sFlow
feature.
Syntax
Mode Privileged Exec and Global Configuration
Example To display the sFlow running configuration information, use the command:
awplus#
Output Figure 65-2: Example output from the show running-config sflow command
Related show running-config
Commands
C613-50170-01 Rev B
show running-config sflow
show running-config sflow
awplus#sh run sflow
!
sflow agent ip 192.0.2.33
sflow collector ip 192.0.2.65
sflow collector max-datagram-size 1200
sflow enable
!
interface port1.0.11-port1.0.22
sflow sampling-rate 512
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
2818