Type Stack Link - Allied Telesis x510-28GTX Command Reference Manual

T C
RIGGER OMMANDS

TYPE STACK LINK

type stack link
Overview This command (configured to the stack) initiates the action of a pre-configured
trigger to occur when a stacking link is either activated or deactivated.
type stack link {up|down}
Syntax
Mode Trigger Configuration
To configure trigger 86 to activate when the stack link down event occurs, use the
Example
commands:
awplus#
awplus(config)#
awplus(config-trigger)#
Related show trigger
Commands
trigger
type stack master-fail
C613-50170-01 Rev B
Parameter Description
up
Stack link up event
down
Stack link down event
configure terminal
trigger 86
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
type stack link down
2772